| MONEL® Alloy
K-500 |
2.4375 |
| |
UNS NO5500 |
A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of
MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as low as -150°F
(-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts.
Stock program
| |
|
| Bars, hot rolled, solution annealed, ground or turned |
kg /
m |
| Ø |
12.0
mm |
|
|
|
0.96 |
| Ø |
16.0 mm |
|
|
|
1.70 |
| Ø |
20.0 mm |
|
|
|
2.65 |
| Ø |
25.0 mm |
|
|
|
4.14 |
| Ø |
30.0 mm |
|
|
|
5.97 |
| Ø |
45.0 mm |
|
|
|
13.42 |
| Ø |
50.0 mm |
|
|
|
16.57 |
| Ø |
60.0 mm |
|
|
|
23.86 |
| Ø |
70.0 mm |
|
|
|
32.48 |
| Ø |
80.0 mm |
|
|
|
42.42 |
| Ø |
90.0 mm |
|
|
|
53.69 |
| Ø |
100.0 mm |
|
|
|
66.29 |
| Ø |
115.0 mm |
|
|
|
87.67 |
|
| Limiting |
| Ni¹ |
min. |
63.00 |
% |
| Cu |
27.00 - 33.00 |
% |
| Al |
2.30 - 3.15 |
% |
| Ti |
0.35
- 0.85 |
% |
| Fe |
max. |
2.00 |
% |
| Mn |
max. |
1.50 |
% |
| Si |
max. |
0.50 |
% |
| C |
max. |
0.25 |
% |
| S |
max. |
0.01 |
% |
| |
|
|
|
| ¹ Plus Co |
|
|
|
| Density |
| g/cm³ |
8.44 |
| lb/in³ |
0.305 |
|
