INCONEL® Alloy 617
2.4663
 
UNS N06617

A nickel-chromium-cobalt-molybdenum alloy with an exceptional combination of metallurgical stability, strength, and oxidation resistance at high temperatures. Resistance to oxidation is enhanced by an aluminum addition. The alloy also resists a wide range of corrosive aqueous environments. Used in gas turbines for combustion cans, ducting, and transition liners; for petrochemical processing; for heat-treating equipment; and in nitric acid production.

Stock program

   
Bars, hot finished, solution annealed
kg / m
Ø
12.7
mm
   
1.06
Ø
16.0
mm
   
1.68
Ø
25.4
mm
   
4.24
Ø
31.75
mm
   
6.62
Ø
50.8
mm
   
19.94
Ø
63.5
mm
   
26.48
Ø
80.0
mm
   
42.02
Ø
101.6
mm
   
67.78
Ø
152.4
mm
   
153.00
     
Sheets, cold drawn, solution annealed, pickled
kg / m²
1.0 x 1000 x 2000 mm  
8.36
1.2 x 1000 x 2000 mm  
10.03
1.27 x 915 x 2440 mm  
10.62
1.27 x 1220 x 3048 mm  
10.62
1.60 x 1000 x 3000 mm  
13.38
2.0 x 1000 x 2000 mm  
16.72
2.5 x 1000 x 2000 mm  
20.90
3.0 x 1000 x 3000 mm  
25.08
3.0 x 1000 x 3000 mm  
33.44
     
Plates, hot rolled, solution annealed, descaled

kg / m²

4.76 x 2000 x 6000 mm  
39.79
6.0 x 2400 x 6000 mm  
50.16
8.0 x 2400 x 6000 mm  
66.88
10.0 x 2400 x 6000 mm  
83.60
12.7 x 2400 x 6000 mm  
106.17
15.8 x 2400 x 6000 mm  
132.72
25.4 x 2400 x 6000 mm  
212.34
Limiting
Ni
min.
44.50
%
Cr
20.00 - 24.00
%
Co
10.00 - 15.00
%
Mo
8.00 - 10.00
%
Al
0.80 - 1.50
%
Fe
max.
3.00
%
Mn
max.
1.00
%
Si
max.
1.00
%
Ti
max.
0.60
%
Cu
max.
0.50
%
C
0.05 - 0.15
%
S
max.
0.015
%
B
max.
0.006
%
 
Density
g/cm³ 8.36
lb/in³ 0.302
 
Recommended Welding Products
Electrode INCONEL 117
Filler Metal INCONEL 617
 
Downloads
   
Datasheet